The Cuplock scaffolding system is a widely used scaffolding system around the world. Made of only the highest quality 48.6 mm diameter tubes and hot-dip galvanized, the Cuplock scaffolding stanard and ledger are durable and can be used as both a scaffolding system and a support system. The Cuplock scaffolding system can be flexibly assembled into modular scaffolding, birdcage scaffolding, suspended scaffolding, mobile scaffolding and support scaffolding. The Cuplock scaffolding system is not only used in the construction of high-rise buildings such as industrial facilities, construction sites, temporary stands, but also in bridge and tunnel construction, shipbuilding, chemical plants, refineries, monument protection, etc.
The Cuplock scaffolding system is a modular or system scaffolding that mainly consists of prefabricated horizontal and vertical components. The unique node locking device is the core of the Cuplock scaffolding system. Four horizontal tubes can be securely attached to a standard or ledger and can be securely locked into place with just one blow of a hammer, no nuts and bolts required. The fixing lower cups are welded to the standard at half-meter intervals. The sliding upper cup falls onto the end of the ledger blade and rotates to lock it securely in place.
There are no loose components in this process, and cuplock is a sturdy scaffolding system with a galvanized surface that is virtually impervious to damage and corrosion. So Cuplock is a zero-maintenance scaffolding system that saves time, money and energy. Compared to coupler scaffolding, cuplock Scaffolding is very simple to install, so it can save a lot of time and money. This makes it a popular choice for builders and contractors who are always looking to reduce costs and save time.
Cuplock Scaffolding standard
Cuplock Scaffolding standard, uses lower fixing cups spaced half a meter apart, with a rotating cup on top. These can securely hold up to four components together. Cuplock Scaffolding standard is made from 40 mm steel tubes and can be used for passage or support. Cuplock Scaffolding standard is available in the following sizes: 500mm, 1000mm, 1500mm, 2000mm, 2500mm and 3000mm.
Cuplock Scaffolding ledger
The Cuplock Scaffolding ledger is also made from 40mm NB tubes, making it very strong and maintenance-free. The horizontal tubes have forged blade ends for simple and quick assembly. The blade ends of the ledger scaffold fit into the cup shape of the standard, ensuring a secure assembly. The standard ledger scaffold can also be used as a guardrail in stair towers. The Cuplock Scaffolding ledger is available in the following standard sizes, but can also be custom made to your requirements: 500mm, 1000mm, 1250mm, 1500mm, 2000mm and 2500mm.
Base jack
The base jack is used as an adjustment component and can be inserted into the bottom or top of the scaffolding support structure. They have an adjustment range of up to half a meter to accommodate differences in ground height and keep the structure level. When fully supported, the Base Jack can take on the full capacity of the Cuplock scaffolding system.
Other cuplock scaffolding system components include the Cuplock Transom, Cuplock Brace Diagonal, Scaffolding walk board, cuplock ladder, etc. Each component increases the adaptability of the cuplock scaffolding system in different projects.