According to different cuplock parts, the wall thickness of the cuplock tube is 2.5mm to 3.2mm. In the production of cuplock scaffolding, the cuplock pipe is connected to cuplock scaffolding accessories such as top cup, bottom plate, oblique rotating piece or scaffold half connector.
Cuplock pipe is a scaffolding material used to make cuplock scaffolding parts. Including cup lock standard, cup lock ledger, cuplock beam, cuplock diagonal brace, etc. According to the component specifications of the cuplock scaffolding system, you can find 40NB light, medium and heavy cuplock pipes. The steel grade of cuplock tube can be s235 and s355. In addition to cuplock piping, you can also find prefabricated cuplock scaffolding system parts that are painted and galvanized.
Cuplock pipe is a hollow section pipe used in the manufacture of cuplock scaffolding materials. The outer diameter is O.D 48.3mm. According to different cuplock parts, the wall thickness of the cuplock tube is 2.5mm to 3.2mm. In the production of cuplock scaffolding, the cuplock tube is connected to cuplock scaffolding accessories such as top cup, bottom plate, oblique rotating piece or scaffold half connector.
Cuplock scaffolding vertical pipe
Cuplock scaffolding verticals are made from scaffolding tubes with an outer diameter of 48.3×3.2 mm. According to cuplock scaffolding standards, S355 steel pipe grade is required for vertical fabrication of cuplock scaffolding. The cuplock tube and cuplock scaffold are jointly designed at 500mm intervals, which meets the requirements of construction scaffolding. In some buildings with higher load-bearing capacity requirements, the outer diameter of the cuplock riser is 48.3×4.omm, which is 40NB, which is heavy-duty.
Cuplock Tube for Cuplock Ledger
Cup-and-clip sorting racks are the horizontal part of a cuplock scaffolding system. The cuplock tube with an outer diameter of 48.3×3.2mm is used to make the cuplock rungs. You can use S235 or S355 steel cup lock tubes to make cup lock ledgers. Cuplock scaffolding Ledger sizes are custom made from 0.5 to 3.05m(10′). Therefore, the length of the cuplock tube depends on the size of your cuplock scaffolding ledger. You can find common cuplock assortment tube sizes and weights below.
Cuplock tube for cuplock system diagonal brace
Cuplock scaffolding diagonal braces are made from cuplock scaffolding tubes with an outer diameter of 48.3×2.5mm. At the end of the cuplock scaffolding tube, a half coupler or rotating blade is bolted to the cup lock tube. The cuplock Bracket is the diagonal size of the cuplock scaffolding Ledger Bracket. Make the cuplock scaffolding tower more stable during construction. Instead of diagonal supports, scaffolding tubes and clamping systems are also used to form cuplock scaffolding diagonals.